ME-9-P series

CAD data download
(DXF)
*Under construction 		CATALOGUE
data download
(PDF)
ME-9-P series




ME-9-P series
  Type name
Item  
ME-9-P
Supply voltage DC5V ±10%
Current consumption 40mA or less
(under no load)
Detection system Incremental
Output pulse number
(Standard)
(Pulse number/rotation)		 32
100
200
256
300
360
500		 900
1000
1024
Output phase A, B, Z phase (Z="H")
Output form Square wave
Output capacity Sink current: 20mA
Residual voltage: 0.5V or less (at 10mA)
Maximum response frequency
(response pulse number)		 100kHz
Output phase difference A, B phase difference 90°±45°(T/4T/8)
Z phase T±T/2 (see Output Waveform)
Waveform rise/fall time 2s or less (output cable 140mm or less)
Starting torque 1x10-3Nm(10gfcm)or less
Allowable load of
shaft (electrical)		 Radial 1.9N
(200gf)		 0.98N
(100gf)
Thrust 1.9N
(200gf)		 0.98N
(100gf)
Maximum allowable revolutions
(mechanical)		 6000r/min
Working ambient temperature/
humidity		 0 to 60
RH35% to 90% no dewing
Storing ambient temperature -20 to 80
Vibration resistance Durability 55Hz, double amplitude 1.5mm
2 hours each in X, Y, and Z directions
Impact resistance Durability 500m/s2 (about 50G)
3 times each in X, Y, and Z directions
Cable Vinyl wire (AWG30)
Cable length 140mm
Mass 10g






Specifications/Sine wave
Supply voltage DC5V ±10%
Current consumption 40mA or less
(under no load)
Detection system Sine waveIncremental
Output pulse number
(Standard)
(Pulse number/rotation)		 1000
Output phase A, B, Z phase
Output form A,B phase : Sine wave
Z phase : Square wave
A,B,Z phase output SIN wave 1.5 Vp-p±0.3 V offset 2.0V±0.2V
OP amp output current 5 mA MAX
Harmonic distortion factor to be within 10%
(Measuring condition to be within 20 kHz,
effective value mean distortion factor measuring instrument)
Maximum response frequency 50kHz
Output phase difference A, B phase difference 90±45(T/4±T/8)
Z phase T±T/2 (see Output Waveform)
Waveform rise/fall time 2s or less (output cable 140mm or less)
Starting torque 1x10-3Nm(10gfcm)or less
Allowable load of
shaft (electrical)		 Radial 0.98N (100gf)
Thrust 0.98N (100gf)
Maximum allowable revolutions
(mechanical)		 6000r/min
Working ambient temperature/
humidity		 0 to 60
RH35% to 90% no dewing
Storing ambient temperature -20 to 80
Vibration resistance Durability 55Hz, double amplitude 1.5mm
2 hours each in X, Y, and Z directions
Impact resistance Durability 500m/s2 (about 50G)
3 times each in X, Y, and Z directions
Cable Vinyl wire (AWG30)
Cable length 140mm
Mass 10g



Supply voltage DC5V ±10%
Current consumption 40mA or less
(under no load)
Detection system Incremental
Output pulse number
(Standard)
(Pulse number/rotation)
EX 1000x2(2000)
1000x4 (4000)
1000x8 (8000)
1000x16 (16000)
Output phase A, B, Z phase (Z="H")
Output form Square wave, Open collector output
Line driver output
Maximum response frequency Open collector output : 100kHz
Line driver output : 50kHz×
Output phase difference See the diagram below.
Waveform rise/fall time 1s or less (output cable 140mm or less)
Starting torque 1x10-3Nm(10gfcm)or less
Allowable load of
shaft (electrical)		 Radial 0.98N (100gf)
Thrust 0.98N (100gf)
Maximum allowable revolutions
(mechanical)		 6000r/min
Working ambient temperature/
humidity		 0 to 60
RH35% to 90% no dewing
Storing ambient temperature -20 to 80
Vibration resistance Durability 55Hz, double amplitude 1.5mm
2 hours each in X, Y, and Z directions
Impact resistance Durability 500m/s2 (about 50G)
3 times each in X, Y, and Z directions
Cable Vinyl wire (AWG30)
Cable length 140mm
Mass 10g




BACK