MEH-180-P series

CAD data download
(DXF)
*Under construction 		CATALOGUE
data download
(PDF)
MEH-180 series




MEH-180-P seriesSOO`¡-@}
  Type name
Item  
MEH-180-P
Supply voltage/
Current consumption		 open collector : DC5V to 12V±10%
open collectorDC24V: DC24V±10%
Line driver: DC5V±5%
Curret consumption Open collector 60mA or less
Linedriver 100mA or less
Detection system Incremental
Output pulse number
(Standard)
(Pulse number/rotation)		 36000
54000
72000
Output phase A, B, Z phase
Output form Square wave Line driver output
Output capacity Sink current: 20mA
Residual voltage: 0.5V or less (at 10mA)
Maximum response frequency
(response pulse number)		 Voltege output·Open collector output:100kHz
Line driver output:300kHz
Output phase difference A, B phase difference 90°±45°(T/4±T/8)
Z phase T±T/2 (see Output Waveform)
Waveform rise/fall time 0.5s or less
(output cable 1m or less)
Starting torque 80x10-3Nm (800gfcm) or less(no oil seal)
Allowable load of
shaft (electrical)		 Radial 29.4N(3kgf)
Thrust 19.6N(2kgf)
Maximum allowable revolutions
(mechanical)		 3000r/min
Working ambient temperature/
humidity		 0 to 50
RH35% to 90% no dewing
Storing ambient temperature -20 to 80
Vibration resistance Durability 55Hz, double amplitude 1.5mm
2 hours each in X, Y, and Z directions
Impact resistance Durability 500m/s2(about 50G)
3 times each in X, Y, and Z directions
Cable Outside diameter 6.5 14-core
Insulated shield cable (length 1m)
Mass 5kg


Output circuit diagram
Output waveform
Output waveform(E:Line driver)
Specifications Built-in multiplication circuit（×2・×4・×8・×16）
Supply voltage Voltage:DC5V-5%~12V+10%
Open collector:DC5V-5%~24V+10%
Line driver:DC5V±5%
Current consumption Open collector 100mA or less(under no load)
Linedriver 140mA or less(under no load)
Detection system Incremental
Output Output pulse number
(Standard)
(Pulse number/rotation)		 EX
36,000×2(72,000)
36,000×4(144,000)
36,000×8(288,000)
36,000×16(576,000)
Output phase A, B, Z phase
Output form Square wave
Maximum response frequency
(response pulse number)		 Line driver output:100kHz× (by multiplication)
Voltage output·Open collector output:100kHz
Output phase difference See the diagram below.
Starting torque 80x10-3Nm(800gfcm) or less
Allowable load of
shaft (electrical)		 Radial 29.4N(3kgf)
Thrust 19.6N(2kgf)
Maximum allowable revolutions
(mechanical)		 300r/min
Working ambient temperature/
humidity		 0 to 50
RH35% to 90% no dewing
Storing ambient temperature -20 to 80
Vibration resistance Durability 55Hz, double amplitude 1.5mm
2 hours each in X, Y, and Z directions
Impact resistance Durability500m/s2 (about 50G)
3 times each in X, Y, and Z directions
Cable Outside diameter
6.5
14-core vinyl wire
Insulated shield cable (length 1m)
Mass 5kg

Output circuit diagram
Output waveform
BACK