|
MGH-12-512ST ECS |
MGH-14--C |
| Supply
voltage |
DC+5V±10% |
| Current
consumption |
150mA or les(s under no load |
40mA
or less (under no load) |
| Detection
system |
Incremental |
Output
pulse number
(Standard)
(Pulse number/rotation) |
512×2
512×4
512×8
512×16
|
100
128
200
250
256
300 |
| Output
phase |
 |
 |
| Output
form |
Square wave Line driver output |
Square
wave Line driver output |
| Output
capacity |
VH=2.5V or more
VL=0.5V or less
IO=±20mA or less |
Sink current 20mA or less,
residual voltage 0.5V
or less (at 10mA) |
Maximum
response frequency
(response pulse number) |
50kHz×(by multiplication) |
100kHz |
| Starting torque |
1×10-3N·m(10gf·cm) or less |
- |
Allowable load of
shaft(electrical)
Radial |
50kHz×(by multiplication)
|
- |
Allowable load of
shaft(electrical)
Thrust |
50kHz×(by multiplication) |
- |
| Output
phase difference |
A,
B phase difference 90°±45°(T/4±T/8)
Z
phase T±T/2 With CS signal (U, V, W)
4 poles, 120° phase
difference 3 signals |
| Waveform
rise/fall time |
1 s
or less |
2s
or less |
Maximum
allowable revolutions
(mechanical) |
6000r/min |
Working
ambient temperature/
humidity |
-10 to
70
RH35%
to 90% no dewing |
0 to
60
RH35%
to 90% no dewing |
| Storing
ambient temperature |
-20 to
80 |
| Vibration
resistance |
Durability
55Hz, double amplitude 1.5mm
2 hours each in X, Y, and Z directions |
| Impact
resistance |
Durability
500m/s2
(about 50G)
3 times each in X, Y, and Z direction |
| Cable |
Vinyl wire 14-AWG30
length300mm±10mm |
Connector |
| Mass |
50g(include a cable) |
10g |
